Determine Six-Digit Grid Coordinate 1. Place your protractor scale on the Zero-Mark(+) 6 3 The 6 digit grid coordinate is 786 003 2. Slide the protractor scale along the horizontal axis) 3. Stop as the vertical axis intersects the plot point 4. Read RIGHT along the horizontal axis 5. Round to the nearest whole number: 6 6. Read UP along
The first component of a MGRS string is the grid zone designator. Grid zones are generally blocks that are 6 degrees wide by 8 degrees high. These are created by subdividing each of the 60 UTM zones into 20 latitude bands. Grid zone designators are represented by the UTM zone number, followed by the latitude band letter.
3 Figure 071-COM-1002 2. Grid Square 1181 Divided a. Allocate the grid square into a 10 by 10 grid. b. Read right (from the lower left corner) to the imaginary gird line nearest the identified point. Note: In the example the North-South imaginary line nearest the point is halfway or 5 lines out of a total of 10 lines. Therefore the first half of your grid coordinate is 115.
How close will a six-digit grid coordinate get you to your point? A six digit grid coordinate will get you within 100 meters to your point. What are the basic colors of a map? The basic colors of a map are black, red-brown, blue, green, brown, red, and other. What does black represent on a map?
They range from 2-digit, 10 km area grids to 6-digit, 100-metre-accurate positions on an unaided map. Using tools like the MicroDAGR GPS and Vector 21, you can go down to the metre with 10-digit grids, for those times you want to send a JDAM through a window. Most commonly, you will be giving the 6-digit figure.
The coordinates for any point on the map can now be expressed as an 8 digit number such as 09360215. The general expression in reference to reading these coordinates is RIGHT-UP. The first four numbers (read left to right) will locate the east-west position on a horizontal grid line. The last four numbers (read bottom to top) locate the north -
Standards: Determine the six digit grid coordinates of the point identified on the map by: finding the coordinates of the grid square where the point is located and the 4 digit grid coordinates of the point, with or without a coordinate scale and protractor or plotting scale. Include the 100,000 meter square identifier with the grid coordinate.

Convert BNG to lat/long. Enter a British National Grid six or seven figure number for both easting and northing to return decimal latitude and longitude. For example, 429157, 623009 will return -1.54, 55.5 WGS84 (SRID 4326) Easting: Example 429157. Northing:

For example, an 8-digit UTM grid coordinate might look like this: 17TNE12345678. In this case, "17T" refers to the UTM zone (in this case, zone 17, which covers much of western North America), "NE" refers to a specific east-west grid cell within that zone, and "12345678" refers to a specific location within that grid cell. loXM7.
  • iesd530r6g.pages.dev/41
  • iesd530r6g.pages.dev/19
  • iesd530r6g.pages.dev/27
  • iesd530r6g.pages.dev/97
  • iesd530r6g.pages.dev/53
  • iesd530r6g.pages.dev/9
  • iesd530r6g.pages.dev/94
  • iesd530r6g.pages.dev/17

    • 8 digit grid coordinate example